Electrolux BM Series Kullanıcı Kılavuzu - Sayfa 12

Buzdolabı Electrolux BM Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Electrolux BM Series 18 sayfaları. Refrigeration
Ayrıca Electrolux BM Series için: Kullanıcı Kılavuzu (18 sayfalar)

Electrolux BM Series Kullanıcı Kılavuzu
8 how to use the features of your appliance electrolux refrigeration
Cleaning:
The sliding deli compartment (twin deli compartment on
selected models) can be removed for ease of cleaning.
In order to do so a flexible locking mechanism has been
incorporated into the rear shelf rail.
.
Remove deli bin.
2.
Remove the shelf assembly by pulling it past the stops.
3.
Place the full assembly up side down on a flat surface.
4.
Slide the sub frame to the left until it engages with
the locking mechanism.
5.
Pull the thumb tag away from the rail to disengage it.
6.
Slide the sub frame past this and allow it to flex
back into position.
Clean the parts as required and allow to dry. To replace
the sub frame repeat this procedure making sure to
align the front lip on the front shelf recess.
caution
All glass used is safety glass. However caution
should be taken when removing the shelf for
repositioning or for cleaning. As the assembly is
relatively heavy and if held in the vertical position (as
shown below) the runner assembly may drop down.
Do not remove any screws!
Spill safe glass shelves (where fitted)
Spill safe glass shelves keep spills on the shelf. A shelf
retaining system minimizes accidental movement of shelves.
The shelves can be adjusted to many different heights. Spill
safe glass shelves are not to be used as slide out shelves.
thumb tag
Slide away glass shelf (where fitted)
This shelf can be used either as a full depth shelf or when
tall items need to be stored at the front of the appliance it
can be collapsed to half its original depth.
To collapse the shelf:
.
Pull the front half of the shelf forward.
2.
Then, from the underside, lift the front half of the
shelf by raising the rear edge over the recessed
hook detail.
Hook detail
3.
Pull the shelf forward and allow the rear to drop into
the side channels.
4.
Push the front shelf backwards (3,4) until it reaches
the rear stops.
Repositioning:
The shelf can be repositioned within the appliance unit
by pulling the whole assembly out until the side panels
are free to pivot down, then pivoting the rear of the shelf
until the shelf is free from the liner runners. The shelf
can then be positioned in any of the runners – this is a
very useful feature if your appliance door happens to
have limited access.
Deodoriser (where fitted)
Your appliance is fitted with a catalysing deodoriser to assist
with the removal of food odours inside your appliance.
Odours are removed by adsorption through the filter by the
normal operation of the appliance. Keeping food covered
and wrapping food with plastic wrap will also help to reduce
the odours inside your appliance.