Electrolux Built-In Dishwasher Kullanım ve Bakım Kılavuzu - Sayfa 7

Buzdolabı Electrolux Built-In Dishwasher için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Electrolux Built-In Dishwasher 22 sayfaları. Built-in oven
Ayrıca Electrolux Built-In Dishwasher için: Kullanım ve Bakım Kılavuzu (36 sayfalar), Kullanım ve Bakım Kılavuzu (44 sayfalar), Kurulum Talimatları Kılavuzu (28 sayfalar), Kullanım ve Bakım Kılavuzu (28 sayfalar), Kullanım ve Bakım Kılavuzu (40 sayfalar), Kullanım ve Bakım Kılavuzu (27 sayfalar), Kullanım ve Bakım Kılavuzu (12 sayfalar), İpuçları ve Tarifler (36 sayfalar), Kullanım Talimatları Kılavuzu (18 sayfalar), Kullanıcı El Kitabı (21 sayfalar), Kullanıcı El Kitabı (13 sayfalar), Kullanıcı El Kitabı (29 sayfalar), Kullanıcı Kılavuzu (27 sayfalar), Talimat Kitabı (17 sayfalar), Talimat Kitabı (15 sayfalar), Talimat Kitabı (18 sayfalar), Talimat Kitabı (27 sayfalar), Talimat Kitabı (18 sayfalar), Servis Kılavuzu (50 sayfalar)

Sayfayı Yazdır

Electrolux Built-In Dishwasher Kullanım ve Bakım Kılavuzu

Stemware

For lightly soiled China and Crystal. Water usage is

7.2 gallons. Wash time is approximately 87 mins.

Rinse

For rinsing dishes that will be washed later. Water

usage is 2.8 gallons. Cycle time is approximately

20 minutes.

ENERGY OPTION SELECTIONS

Hi-Temp Wash

When HI-TEMP WASH option is selected, the

dishwasher heats water in the main wash to

approximately 140°F (60°C).

This increase in water temperature helps

dishwasher detergent remove food, grease and soil

from dishes more effectively and aids in drying.

HI-TEMP WASH option can be used with all cycles

except RINSE.

When HI-TEMP WASH option is selected, the Icon

wil ligh up and remain on until end of cycle.

To turn off the HI-TEMP WASH option, press the

pad a second time. The light surrounding the pad

will turn off.

Operating Instructions

Sanitize

To sanitize your dishes and glassware, select the

SANITIZE option. When selected, the light

surrounding the pad will remain lit until the START/

CANCEL pad is pressed or the door is closed. This

option heats the water temperature in the final rinse

to 155°F (68°C) and maintains that temperature for 9

minutes. SANITIZE is available in Auto, Heavy,

Stemware and Normal cycles. Only these

sanitization cycles have been designed to meet

NSF requirements.

The cycle time will be extended until the proper

water temperature is reached. Washing action will

continue during the water heating delay. For best

results, the incoming water temperature should be

at least 120°F (49°C).

The light surrounding the pad will not illuminate at

the end of the cycle if the NSF requirements for

sanitization are not reached. The sanitization criteria

may not be satisfied if there is an interruption of the

cycle, a power failure occurs, or if the incoming

water temperature is below 120°F (49°C).

To turn off the SANITIZE option, press the pad a

second time. The light surrouding the pad will turn

off.

OPERATION SELECTIONS

Delay Start

The DELAY START option allows you to

automatically delay starting your dishwasher from

1 to 24 hours which varies by model.

Press the DELAY START pad until the desired

delay time shows in the STATUS window. A light

will come on indicating the delay start hours and

will remain on until cycle starts.

To cancel the DELAY START option and begin the

cycle before the delay period is over, press the

START/CANCEL pad.