Bosch 6 Series Kullanım Kılavuzu - Sayfa 10

Sayfayı Yazdır

Cleaning

Changing the basic settings

The hob must be switched off.

Switch on the hob.

Within the next 10 seconds, touch the

4 seconds.

and

flash alternately in the left-hand display;

™

‚

lights up in the right-hand display.

Touch the

symbol repeatedly until the desired

indicator appears.

Set the desired value on the control panel.

Touch the

symbol for 4 seconds.

The setting is activated.

Switching off

To exit the basic setting, switch off the hob with the

main switch and make new settings.

DCleaning

S uitable maintenance and cleaning products can be

C l e a n i n g

purchased from the after-sales service or in our e-Shop.

symbol for

Ceramic

Clean the hob after each use. This will prevent spills

from burning onto the ceramic.

Only clean the hob when it has cooled down sufficiently.

Use only cleaning agents which are suitable for glass

ceramic. Follow the cleaning instructions on the

packaging.

Never use:

‹

■

Ground-in dirt can be best removed with a glass

scraper, available from retailers. Please note the

manufacturer's instructions.

You can also obtain a suitable glass scraper from our

after-sales service or from the e-Shop.

Using special sponges to clean glass ceramic achieves

great cleaning results.

Hob surround

To prevent damage to the hob surround, observe the

following instructions:

■

Undiluted washing-up liquid

Detergent intended for dishwashers

Scouring agents

Harsh cleaning agents such as oven spray or stain

remover

Abrasive sponges

High-pressure cleaners or steam jet cleaners

Use only hot soapy water.

Wash new sponge cloths thoroughly before use.

Do not use any sharp or abrasive agents.

Do not use the glass scraper.