Bosch 8 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 7

Sayfayı Yazdır

Bosch 8 Series Kullanım Kılavuzu ve Kurulum Talimatları

Touch field

Function

Timer

Information

Childproof lock

Open the control panel

4.4 Touch displays

The touch displays act as both displays and controls.

The touch displays are divided into several text fields.

The text fields show you the current selection options

and settings that have already been implemented. To

select a function, press directly on the corresponding

field.

The selected function is marked with a red vertical bar

on the side of the text field. The value for this is high-

lighted in white in the Display → Page 7.

The small red arrow next to the text field shows you the

function that you can scroll back to.

4.5 Control ring

You can use the control ring to change the setting val-

ues that are shown in the display and scroll in the

touch displays.

When you reach the minimum or maximum value avail-

able, this value remains in the display. If required, use

the control ring to turn the value back again.

4.6 Display

The display shows the current setting values on differ-

ent levels.

Value in the

The value in the foreground is high-

foreground

lighted in white. You can use the control

ring to change the value directly.

Once operation has started, the temper-

ature or level is displayed in the fore-

ground.

Value in the

Values in the background are displayed

background

in grey. To change the value using the

control ring, select the required function

in advance.

Enlarge-

As long as you use the control ring to

ment

change a value, only this value will be

displayed as enlarged.

Display ring

The display ring is located around the outside of the

display.

¡ Position indicator

If you change a value, the display ring shows you

where you are in the selection list. The display ring

may be continuous or divided into segments de-

pending on the settings area and the length of the

selection list.

Use

Open the "Operating modes" menu.

→ "Operating modes", Page 8

Select the timer.

Display additional information about a function or setting.

Press and hold for approx. four seconds: Activate or deactivate the child-

proof lock.

Open the control panel to remove the water tank.

¡ Progress indicator

Temperature display

The heating line and the residual heat indicator show

you the temperature in the cooking compartment.

Due to thermal inertia, the temperature that is displayed

may differ slightly from the actual temperature inside

the cooking compartment.

¡ Heating line

¡ Residual heat indicator

4.7 Cooking compartment

The functions in the cooking compartment make your

appliance easier to use.

Shelf supports

The rails in the cooking compartment enable you to

place accessories at different heights.

→ "Accessories", Page 10

Your appliance has three shelf positions. The shelf pos-

itions are numbered from bottom to top.

You can remove the rails, e.g. for cleaning.

→ "Rails", Page 25

Familiarising yourself with your appliance en

During operation, the display ring displays the pro-

gress and turns red at second-long intervals.

As the cooking time counts down, one segment of

the display ring disappears every second.

Once operation has started, the white line below the

temperature turns red as the cooking compartment

heats up. When you are preheating the appliance,

the optimal time to place your food in the cooking

compartment is as soon as the entire line has

turned red.

With set levels such as grill settings, the heating line

turns red immediately.

When the appliance is switched off, the display ring

shows the residual heat in the cooking compart-

ment. As the residual heat dissipates, the display

ring gets darker before eventually disappearing

completely.