1byone O00QL-0041 Kullanım Kılavuzu - Sayfa 2

Sis Makinesi 1byone O00QL-0041 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. 1byone O00QL-0041 14 sayfaları. 400 watt fog machine

Sayfayı Yazdır

1byone Products Inc.

USER MANUAL

400 Watt Fog Machine

SKU: O00QL-0041

It is very important to operate this product according to the following instructions. Failure to do

so may render your guarantee void.

Accessories List

The product comes with

● 1 x Product Body with Power Cable

● 1 x Wired Control Cable and Box

● 1 x User Manual

Product Body with Power Cable

Speci cations

● Power Consumption: 400W

● Warm up time: 3~5min

● Tank Capacity:0.3L (0.079 gal)

● Smoke Output: 2000cuft/min

● Output Time: 35~45s

● Power Sources: Voltage: AC 110-120V 60Hz

www.1byone.com

Wired Control

User Manual

Cable and Box

● Fuse: 5A, 125V

● Wired on/off controller (included):

6.56ft(2M) length cord

● Outline Size: 250 x 191.5 x 114mm

(9.84 x 7.54 x 4.49 in.)

● Output Distance: 2.5M(8.2ft)

www.1byone.com

Names for Parts

(A) Spray Nozzle

(E) Wired Control Cable Interface

(G) On/Off Switch

(H) Wired Control Indication Light

(I) Wired Control Box

(J) Wired Control Cable

How to Use?

Before using the fog machine, you have to prepare Fog Liquid (not included). Then operate

according to following sequence.

1. Remove all the packages.

2. Carefully put this product onto a clean, flat and solid surface, close to the power socket.

3. Unscrew the lid on the tank by turning counterclockwise and pour the Fog Liquid inside. Do not

spill Fog Liquid onto the product body. Do not overfill. If liquid gets into the Fog Machine, leave it

to be dry completely before plugging in. Do not cut, pinch, or break the tube connected through

the tank lid. Screw the lid clockwise to the tank tightly. Always make sure there is enough Fog

Liquid in the tank before using the Fog Machine.

4. Connect the wired control cable to the Interface at the back of the Fog Machine.

5. Connect the product with proper power socket.

6. Warm up time is approximately 4 – 5 minutes. When fully heated, the Wired Control Indication

Light will turn on and the Fog Machine will be ready to produce and spray fog.

7. Set the On/Off Switch to on position, nozzle will start spraying fog. Set to off position, spraying

will stop.

8. Turn off the unit before refilling the fog machine.

9. Unplug the unit when not in use.

10. To refill the tank; turn off the unit, unplug and follow the directions in Step 3.

11. For Indoor Use Only

(B) Handle

(D) Product Cover

(F) Fuse Knob