1byone O00QL-0043 Kullanıcı Kılavuzu - Sayfa 3
Sis Makinesi 1byone O00QL-0043 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 1byone O00QL-0043 5 sayfaları. 400 watt fog machine
Sayfayı YazdırA: Fog Machine
B: Wired Control Box and Cable
Additional Information
(a) It is normal if there is condensation on the nozzle of the Fog Machine.
(b) A small amount of fog may spray during or after operation.
(c) The Fog Machine will have to reheat after long spray. It will stop operation for a short period in order to heat up
to operating temperature again. While this is happening, fog cannot be produced.
The Wired Control Indication Light will turn on again when the unit is ready to generate more fog.
(d) All fog machines are apt to clogging due to the consistency of Fog Liquid and the high
temperatures at which it vaporizes.
Maintenance and Cleaning
● Maintenance and cleaning shall only be done to the product surface. Unplug this product from the power socket
before cleaning.
● Do not wet any electric parts of this product. Please use a dry, soft cloth instead of sharp tools for cleaning.
● If you find there is low fog output after many hours of continuous operation or after the machine has been idle or
in storage for a long time, it is advised to empty all Fog Liquid from the machine and clean the tank. Please unplug
the machine from power socket before cleaning.
Storage
It is important to clean up fluid in the Fog Machine when storing for an extended period of time.
1. Remove the tank lid. Pour out the fog liquid in the fog machine to a container.
2. Keep the fog machine working for a few seconds to run out the fog liquid in the fog machine.
3. Fill a little fog machine cleaner liquid in the tank, keep the fog machine working till running out.
4. Switch off, unplug the fog machine, and put it on a flat, dry place.
C: Fog Liquid (not included)
D: Power Cable