Bosch Integra SHV58E13UC Planlama Kılavuzu - Sayfa 5
Bulaşık Makinesi Bosch Integra SHV58E13UC için çevrimiçi göz atın veya pdf Planlama Kılavuzu indirin. Bosch Integra SHV58E13UC 12 sayfaları. Custom dishwasher
Sayfayı Yazdır
6 |
Bosch Custom Dishwasher Planning Guide
Planning for your Custom Panel Dishwasher
Before installing a Bosch dishwasher, be sure to verify the cabinet dimensions, electrical
connections and water connections. Always consult the installation manual included with
the product for complete details before installing.
What to consider when installing a custom panel dishwasher
Bosch dishwashers are designed to be surrounded by standard residential kitchen cabinetry. If the dishwasher is to be
installed in a corner, make sure that there is adequate clearance of 27" to open the door.
For SHV43P13UC, SHV65P03UC, and SHV68P03UC
– Minimum opening height: 34" (860 mm)
– Minimum opening width: 24" (610 mm) or 23
⁄
" (600 mm) Wide with decor strips removed
5
8
For SHV58E13UC and SHV68E13UC
– Minimum opening height: 34
⁄
" (865 mm)
1
4
– Minimum opening width: 24" (610 mm) or 23
⁄
" (600 mm) Wide with decor strips removed
5
8
Bosch
B
A
Custom Panel
Dishwasher
toekick
C
Installation options
Custom panel models allow you to have a door panel made to match your
cabinetry. The door panel can be a two-piece design (model
a drawer at the top and a cabinet door at the bottom or a single full-length
door (model
). A template is included with the custom panel models to
2
explain the mounting procedure. Additional templates can be ordered by
calling customer service at 1-800-944-2904.
NOTE: The door springs that are included with the custom panel units will
provide proper function for custom door panels weighing between 9 and
18 pounds. SHV43P13UC, SHV65P03UC, and SHV68P03UC allow you to
adjust the screw tension to accommodate for the weight of the door panel.
SHV58E13UC and SHV68E13UC require no tension adjustment screws as
the hinges self adjust to weights ranging from 9 to 18 pounds.
A
B
C
–
=
Custom panel height
Height from
Height
bottom edge
of the
of countertop
toe-kick
to floor
Suggested dimensions for 34
⁄
" countertop height and 4
1
2
– Suggested panel thickness:
⁄
"
3
4
– Suggested panel width:
23
⁄
"
1
4
– Suggested panel height:
30"
– Suggested panel weight:
9–18 lbs
Note: As all installations are different, please verify dimensions
for your specific project.
) to look like
1
1
Water and electrical locations
For proper dishwasher operation and appearance, ensure the enclosure is
square and the openings allow for passage of water, drain and electrical line.
Select a location as close to the sink as possible for easy access to water
supply and drain lines. In order to avoid interference with the dishwasher when
sliding it into the cabinet, place your openings within the dimensions shown.
Plumbing and electrical supply hoses must attach to the dishwasher within the
shaded area.
Note: Plumbing installations will vary – refer to local codes. The maximum
length of the drain hose, including hose leading to air gap (if any) is 150"
(3810 mm). Ensure a portion of the drain hose is raised at least 20" (508 mm)
above the floor to ensure proper draining.
Special consideration for SHV58E13UC and SHV68E13UC
4
1
⁄
" x 2" (108 x 52 mm) – To pass the included electrical supply junction box through to an adjacent cabinet
4
4" x 2" (100 x 50 mm) – To pass the included water supply line to the water supply
1
⁄
" (32 mm) diameter – To pass the dishwasher drain hose to the drain connection
1
4
NOTE: If the incoming electric supply, water supply and drain connections are all in the same cabinet, the one 4
(108 x 52 mm) hole will generally be large enough for all three parts to pass through.
The dishwasher electrical supply junction box and dedicated receptacle must be mounted in an accessible cabinet adjacent to the
dishwasher (do not mount the junction box or receptacle behind the dishwasher).
⁄
" toekick:
The electrical supply can be connected in one of two ways:
1
2
1. Use the included three prong plug and junction box to connect to a dedicated household receptacle.
2. Permanently connect to household or field wiring
90°
90°
Water
Shut Off
Dishwasher
Valve
Water Inlet
Hose
2
Bosch Custom Dishwasher Planning Guide
Describes
Describes
the space
the cutout
(if any)
of adjoining
between
cabinets
cabinets
and wall
Dedicated
Receptacle or
Field Wiring
Dishwasher
Electrical Supply
Junction Box
Electric cord with
junction box and
three prong plug
are included
with dishwasher
| 7
90°
⁄
" x 2"
1
4