Bosch SB Series Kullanım Kılavuzu - Sayfa 35

Sayfayı Yazdır

Delivery

Your dishwasher has been checked

thoroughly in the factory to ensure that it

is in working order. This may cause

small water stains. These will disappear

after the first wash cycle.

Technical specifications

Weight:

max. 60 kg

Voltage:

220–240 V, 50 Hz or 60 Hz

Connected load:

2.0–2.4 kW

Fuse:

10/16 A (UK 13A)

Power input:

switched off 0.10 W

not switched off 0.10 W

Water pressure:

at least 0.05 MPa (0.5 bar), maximum

1 MPa (10 bar). At a higher water

pressure: connect pressure-reducing

valve ahead.

Inlet rate:

minimum 10 litres/minute

Water temperature:

Preferably cold water; if hot water,

depending on type of water inlet hose,

max. temp. 60 °C (see Drinking water

connection).

Capacity:

12–15 place settings

(depending on model).

Installation and connection

Installation

The required installation dimensions can

be found in the installation instructions.

Level the appliance with the aid of the

height-adjustable feet. Ensure that the

appliance is situated securely on the

floor.

A built-under or integrated appliance

which is installed subsequently as a

free-standing appliance must be

secured to prevent it from

overturning, e.g. by screwing it to the

wall or by installing it under

a continuous worktop which is

screwed to adjacent cupboards.

The appliance can easily be

installed in a fitted kitchen between

wooden and plastic walls.

Waste-water connection

1. The required work sequence can be

found in the installation instructions.

If required, fit a siphon with an

drainage connection.

2. Connect the waste-water hose to the

drainage connection of the siphon

with the enclosed parts.

Ensure that the drainage hose is not

kinked, crushed or twisted and that

there is no cover plate in the

drainage to prevent the waste water

from flowing out!