Bosch SB Series Kullanım Kılavuzu - Sayfa 24

Sayfayı Yazdır

Operating the appliance

To change the setting:

1. Press programme button 3.

Each time the button is pressed,

the set value increases by one level;

when the value of :

reached, the display jumps back

to :

2. Press START button `.

The set value is saved.

3. Close the door.

Switching off the appliance

Short time after the end of the

programme:

1. Open the door.

2. Switch off ON/OFF switch (.

3. Turn off the tap (not applicable if

Aqua-Stop fitted).

4. Remove the utensils when they have

cooled down.

Note

When the programme ends, leave

the appliance to cool down a while

before opening it. This will prevent

steam from escaping and causing long-

term damage to your built-in furniture.

has been

Interrupting the programme

1. Open the door.

2. Switch off ON/OFF switch (.

The LEDs go out. The programme is

saved.

If the door was opened on an

appliance which has a warm water

connection or is heated, first leave

the door ajar for several minutes and

then close. Otherwise, expansion

(pressure) may cause the appliance

door to spring open or water to run

out of the appliance.

3. To continue the programme, switch

on the ON/OFF switch ( again.

4. Close the door.

T erminating the programme

T e r m i n a t i n g t h e p r o g r a m m e

(Reset)

1. Open the door.

2. Press START button ` for

approx. 3 sec.

The numerical display h indicates

3. Close the door.

The programme sequence lasts

approx. 1 min. On the digital display

h is indicated :

4. Open the door.

5. Switch off ON/OFF switch (.

6. Close the door.

Changing the programme

When the START button ` has been

pressed, the programme cannot be

changed.

The only way a programme can be

changed is by Cancel programme

(Reset).