Bosch SB Series Kullanım Kılavuzu - Sayfa 35

Sayfayı Yazdır

Fault

Initial or existing,

irreversible clouding of

glass.

Rust spots on the cutlery.

Appliance does not start.

Programme starts

automatically.

The door is difficult to

open.

Door cannot be closed.

Cover on the detergent

dispenser cannot be

closed.

Cause

Glasses not dishwasher-proof,

only suitable for dishwasher.

Cutlery not adequately rust-

resistant. Knife blades are

frequently more severely

affected.

Cutlery will also rust if rusting

parts are rinsed at the same time

(pan handles, damaged utensil

baskets, etc.).

Salt content in the rinsing water

too high, as salt dispenser lock

not fastened firmly or salt was

spilled while being refilled.

The mains fuse has tripped.

Power cord not inserted.

The appliance door has not been

shut properly.

You did not wait until programme

ended.

Child lock is activated.

Door lock has been activated.

Door cannot be closed due to

installation.

Detergent dispenser or cover

guide blocked by sticky detergent

residue.

Fault, what to do?

Remedial action

Use dishwasher-proof glasses.

Avoid long steam phase (standing time after

wash cycle ends).

Use wash cycle at lower temperature.

Set water softening system according to the

water hardness (if required one setting

lower).

Use detergent with glass protection

component.

Use corrosion-resistant cutlery.

Do not wash rusting parts.

Fasten salt dispenser lock firmly or remove

spilled salt.

Check mains fuse.

Ensure that the power cord is plugged all

the way into the back of the appliance and

into the socket. Check that the socket

functions.

Close the door.

Perform reset.

(See "Terminating the programme").

Deactivate child lock. (See instructions for

use at the back)

Close door with increased force.

Check appliance installation: Door

or attached parts must close without

obstruction.

Remove detergent residue.