Bosch sce53m05au Kullanım Talimatları Kılavuzu - Sayfa 20

Bulaşık Makinesi Bosch sce53m05au için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Bosch sce53m05au 23 sayfaları. Bosch dishwasher operating instructions

Sayfayı Yazdır
en
– The connection may be modified by
technicians only.
– A power cord extension may be
purchased from customer service only.
– Use only a residual current operated
circuit-breaker which features
the symbol ‚. Only this extension
guarantees compliance with
the currently valid regulations.
– The appliance features a water
damage protection system. Please
note the system will not function
unless the power supply is connected.

Removing the appliance

Also observe the sequence of worksteps
here.
– Disconnect the appliance from the
power supply.
– Turn off the water supply.
– Disconnect the waste water and fresh
water connections.
– Pull out the appliance, carefully pulling
the hose behind.

Transportation

Empty the dishwasher and secure loose
parts.
Drain the appliance according to the
following steps:
– Turn on the tap.
– Close the door.
– Switch on ON/OFF switch (. The
displays of the last selected
programme light up.
– Select programme with the highest
temperature.
The expected programme duration is
indicated on the numerical display
`.
– Press START button H.
Programme sequence starts.
– After approx. 4 minutes press the
START button H until :
indicated on the digital display.
After approx. 1 min :
on the digital display .
– Switch the appliance off ( and turn
the tap off.
20
Transport appliance upright only.
(This prevents residual water from running
into the machine control and damaging
the programme sequence.)
P r o t e c t i o n a g a i n s t f r o s t ( E m p t y i n g t h e a p p l i a n c e )
If the appliance is in a room where there is
a risk of frost (e.g. holiday home), empty
the appliance completely (see
Transportation).
– Turn off the tap, disconnect supply
is
is indicated
P rotection against frost
hose and drain water.