Bosch SGI 58M05 Kullanım Kılavuzu - Sayfa 7

Bulaşık Makinesi Bosch SGI 58M05 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch SGI 58M05 29 sayfaları.

Sayfayı Yazdır

Close the door.

Hold down programme button B and

press

main switch until the digital

display illuminates, then release the

buttons.

The LED for button B flashes and

the digital display displays the factory

setting

To change the setting,

press programme button B .

Each time the button is pressed, the set

value increases by 1; after

setting goes back to

Switch off the main switch

chosen setting has now been stored.

Downloaded from DishWasher-Manual.com Manuals

Filling the salt dispenser

Salt must always be filled before the

appliance is switched on, so that excess

salt solution is immediately flushed away

to prevent corrosion.

, the

. The

The LOW SALT indicator

panel will light up initially but will extinguish

again after a short period when the salt

solution has become sufficiently

concentrated.

When the control is set to

necessary to fill up with salt as none will

be consumed while the dishwasher is

operating. The LOW SALT indicator is

switched off. If the control is set between

to the dispenser.

Do not pour detergent into the container

for special salt. This would destroy the

water softener.

Open the screw-type cap of the

compartment

Before using the appliance for the first

time, pour about 1 litre of water in the

salt container.

Then refill with salt (not cooking salt)

until the salt container is full

(max. 1.5 kg). When you refill the salt,

water is being displaced and drains off.

and

, then salt must be added

Warning

on the front

, it is not