Bosch SGS 09T06 Kullanım Kılavuzu - Sayfa 21

Bulaşık Makinesi Bosch SGS 09T06 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch SGS 09T06 36 sayfaları.

Sayfayı Yazdır

Saving time (VarioSpeed)

The Auto Programmes allow you to reduce

the run time of the programmes. However,

in order to achieve an optimal cleaning

result, the water and energy consumption

will be increased.

If the option "Reduce time" is chosen

the display shows "Reduce Time: Off"

(factory setting).

Select "Reduce time: On".

Return to the Main Menu by pressing

M/OK

and start the required

programme by pressing the Start

Button

If you do not want to use "Reduce time"

the next time you use the dishwasher,

you must deselect this option.

Onboard computer

If the "Onboard computer on" option

is activated, the following displays are

indicated in succession according to

the selected programme:

"Normal spray active"/"Gentle spray

active"/"Intensive spray active"

"Hygienic washing"

"Glass protection system is active"

"Heat exchanger is active".

If the onboard computer option

is selected,

"Onboard computer off" is displayed

(factory setting).

Select "Onboard computer on".

If you no longer wish additional

information to be displayed during

the next rinse cycle, you must

switch the option off again.

Drying Level

If the option "Drying Level" is chosen

the display shows "Normal drying"

(factory setting).

Alternatively you can select "Eco drying"

or "Extra drying".

The option "Extra drying" increases

the temperature during rinsing in all

programmes. (Please take care with

delicate dishes.)

Downloaded from DishWasher-Manual.com Manuals

Buzzer Volume

You can vary or even completely switch

off the volume of the acoustic

end-of-programme signal.

If the option "Buzzer Volume" is chosen

the display shows "Buzzer 6" (factory

setting).

You can change this value to 0

(acoustic signals switched off) or

to values between 1 (quiet) and

6 (loud). A short buzz demonstrates

the currently chosen volume level.

Adding Rinse Aid

You can set the amount of rinse aid

added.

If the option "Adding Rinse aid" is

chosen the display shows "Rinse Aid 4"

(factory setting).

Change this setting only if there are

streaks (reduce the value) or water

stains (increase the value) remaining

on the dishes.

You can choose a value between 0

and 6.

Water Hardness

Before starting the appliance for the first

time or in case of changes in the water

hardness, the dishwasher's softening

system must be set to the hardness of

your mains water supply. Follow the

instructions set out in the chapter "Set-up

of the Softening System".

Interior light *

If the interior light option is selected,

"Interior light: On" is indicated on the

display (factory setting). You can switch

the interior light on or off. The avtivated

interior light comes on when the door is

open, irrespective of whether the main

switch is on or off. When the door is

closed or ajar, the light is off.

* some models