Bosch SGS 44E18 Kullanım Kılavuzu - Sayfa 8

Bulaşık Makinesi Bosch SGS 44E18 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch SGS 44E18 32 sayfaları.

Sayfayı Yazdır

Filling in the Salt

Function of the salt

During the rinse cycle the salt is being

washed automatically from the salt

compartment into the softening system

where it will dissolve the lime.

The lime-containing solution drains from

the dishwasher. Afterwards the softening

system is ready to be loaded again.

This regeneration cycle will only work

if the salt is dissolved in water.

Open the screw-type cap of the

compartment

Before switching on the appliance

for the first time, pour approx. 1 litre

of water into the salt dispenser.

Then refill with salt (not cooking salt)

until the salt container is full (max.

1.5 kg). When you refill the salt, water

is being displaced and drains off.

Therefore, to prevent corrosion, always

refill with salt immediately before

switching on the dishwasher. This way

the overflowing salt solution is diluted

and flushed immediately. Use the

enclosed salt filling aid ( in some

models).

Then clean the filling area of salt

residues and screw the compartment

lid back on without tilting the lid.

Downloaded from DishWasher-Manual.com Manuals

The LOW SALT indicator

panel will light up initially but will extinguish

again after a short period when the salt

solution has become sufficiently

concentrated.

If the set hardness value is "0", do not

add salt because no salt is used during

operation; the salt refill indicator

is switched off.

Do not pour detergent into the

container for special salt. This

would destroy the water

softener.

Salt refill indicator

As soon as the salt refill indicator

on the control panel, refill with salt

immediately before the next rinse cycle.

Depending on the washing frequency and

the hardness setting, the regeneration salt

may not have to be topped up for several

months.

on the front

is lit