Bosch SGS 46M22 Kullanım Kılavuzu - Sayfa 19

Bulaşık Makinesi Bosch SGS 46M22 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch SGS 46M22 32 sayfaları.

Sayfayı Yazdır

End of programme

The programme has ended when a figure

appears in the numerical display

Switching the dishwasher OFF

Several minutes after the programme has

ended:

Set the main switch

Turn the water tap off.

(Does not apply when Aqua-Stop unit

has been fitted)

Remove dishes, etc. when they have

cooled down.

Interrupting the programme

Set main switch

Indicator lights extinguish. The

programme is retained in the

dishwasher memory.

If the hot water was switched ON or the

appliance has already heated up and then

the appliance door opened, leave the door

ajar for several minutes and then close.

Otherwise, the appliance door may fly

open due to expansion.

In order to continue with the stored

programme, set the main switch to ON

again.

Cancel programme (Reset)

Only when the master switch is ON.

Press the A and C buttons

simultaneously, and hold them pressed

for approx. 3 seconds.

The numerical display shows

Close the door.

The programme continues for approx.

1 min.

When it has ended, set the main switch

to OFF.

Close the detergent compartment

To restart the dishwasher, set main switch

to ON again and select desired

programme.

Downloaded from DishWasher-Manual.com Manuals

to OFF.

Changing the programme

It is possible to change the programme

within 2 minutes after you have switched

the dishwasher on.

Should it be necessary to change the

programme after this period, the

programme cycle that has already been

begun (e.g. washing) will be completed

first of all.

The new remaining time displayed is the

sum of the remaining time from the

preceding programme cycle and the

remaining time attributable to the new

programme that has been selected.

Intensive drying

If the "Intensive drying" function is

activated, the temperature of the final rinse

is increased in all programmes and you

will therefore receive an improved drying

result. (Note the higher temperature may

not be suitable for fragile utensils.)

Hold down the programme button A

and switch on the main switch.

Release both buttons.

The digital display

(off).

To change the setting, press the

programme button A .

Switch off the main switch

the setting is stored.

flashes

(on)

;