Advanced Diagnostics AD100 Manuel - Sayfa 5

Teşhis Ekipmanları Advanced Diagnostics AD100 için çevrimiçi göz atın veya pdf Manuel indirin. Advanced Diagnostics AD100 17 sayfaları.

INTRODUCTION

PRODUCT DESCRIPTION

The AD100 is an Advanced Serial Diagnostic system which has been designed and

developed to offer the most advanced diagnostic capabilities.

The AD100 can be used as a hand held portable diagnostic system, and is equipped with

64MB of RAM which is used for the application data, and 4MB of Flash for the protocol

handling system. In addition to this it has a RS232 interface connection for transferring

application data from a PC and printing.

The unit has a 128x64 Dot Matrix Back Lit LCD TFT display along with membrane keypad.

The unit is capable of reading fault codes, clearing fault codes, displaying live data,

performing special functions, and recording live data both statically and on the road.

The unit is powered from the vehicle battery, and connects to the serial diagnostic

connector through a 25way D-Type cable system.

POWER CONNECTION

The unit is powered by the vehicle 12 volts battery which is connected to the diagnostic

socket. If no power is available through the vehicle diagnostic socket then the adapter

cable will have the vehicle battery connections.

VEHICLE CONNECTION

The master cable AD110 is used to connect the equipment to the various adapters

available for the different vehicle connector types.

This system enables the equipment to be kept up to date with the various diagnostic

connectors at a reasonable cost.

LCD BACKLIGHT

The LCD BACKLIGHT is automatically switched on when the unit has power. This cannot

be switched off or adjusted. If the unit is not used for a period of time the LCD backlight

will automatically switch off, and as soon as any key is pressed it will switch back on

again.

2.1