Dragon Wholesaling CR300 Hızlı Başlangıç Kılavuzu

Kağıt Öğütücü Dragon Wholesaling CR300 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dragon Wholesaling CR300 2 sayfaları. Crusher

Sayfayı Yazdır

CR300 Crusher

Quick start guide

Checks Before Starting

• Ensure the machine is located on firm flat ground.

• Check all guards are fitted.

• Carefully inspect tracks for cuts or other damage.

• Check the chute and crusher chamber are clear

• Visually check for fluid leaks.

• Ensure there is sufficient fuel in the fuel tank.

• Ensure that all track levers are in the neutral position.

• Ensure E-Stop buttons are pulled out.

Always allow the engine to warm up gradually before operating at

NOTE: To extend the life of the starter motor, use only short starting cycles - 5 seconds max.

NOTE: After the ON key has been turned clockwise, the machine must be started within 20

seconds else it will switch OFF.

WARNING Do not use or attempt to start the

crusher without the protective guarding in place.

Failure to do so may result in injury

full speed and load.