DRAGONFIRE 01-2127 Kurulum Talimatları - Sayfa 3

Otomobil Aksesuarları DRAGONFIRE 01-2127 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. DRAGONFIRE 01-2127 3 sayfaları. Rear smash bumper for the maverick & maverick max

Sayfayı Yazdır

Step 7: Place rear bumper into position and

secure top mount with supplied hardware.

Leave loose at this time. See Figure F

Step 8: Re-install factory hardware

previously removed in step 3 on lower a-

arm mounts, retaining lower bumper

mount.

(If you are installing with rear receiver

hitch mount, bumper will set on top of hitch

See Figure G

plates)

Step 9: Secure all bumper mounting

hardware to factory torque specs provided

in owner's manual.

Step 10: Place outer fender support tabs

behind factory plastics, align with hole

where hardware was previously removed in

step 6. Secure into place using this same

hardware. See Figure H

ProTip: Check all hardware periodically and re-tighten if needed

For further assistance please contact your authorized DragonFire dealer

Dragonfire Racing