AirStage ARXB14GALH Kurulum Kılavuzu - Sayfa 16

Klima AirStage ARXB14GALH için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. AirStage ARXB14GALH 19 sayfaları. Indoor unit (duct type)

Sayfayı Yazdır

6.8. IR receiver unit (Optional parts)

• For the installation method, please refer to the INSTALLATION MANUAL of IR receiver

unit.

Connection methods

• Connection terminals

Controller PCB

• Wiring arrangement

Note (*): Remove the mounted cover, and mount the one touch bushing (Accessory).

6.9. Drain pump unit (Optional parts)

• For the installation method, please refer to the INSTALLATION MANUAL of drain pump

unit.

Connection methods

• Connection terminals

Power supply PCB

En-15

IR receiver unit

terminal (CN18)

Core

Controller PCB

Cable tie

One touch bushing

(Field supply)

(Accessories)*

Controller PCB

Flort switch

terminal (CNA05)

Drain pump

terminal (CN106)

• Wiring arrangement

Cable tie

(Field supply)

Note (*): Remove the mounted cover, and mount the one touch bushing (Accessory).

7. FIELD SETTING

There are 3 methods for address setting by FIELD SETTING as follows.

Set by either of the methods.

Each setting method is described (1) to (3) below.

(1) IU AD, REF AD SW settings....This section (7.1. Setting the address)

(2) Remote controller settings ............... Refer to the wired or wireless remote controller

(3) Automatic address settings ............. Refer to the outdoor unit manual for detailed

Be sure to turn OFF the power before performing the ﬁ eld setting.

7.1. Setting the address

Manual address setting method

• If the receiver unit is attached, the indoor unit address and the refrigerant circuit

address can also be set up through the wireless remote controller.

Use an insulated screwdriver to set the DIP switches.

Rotary switch

Example: "0"

Setting

range

Indoor unit address

0 to 63

Refrigerant circuit

0 to 99

address

Controller PCB

One touch bushing

(Accessories)*

manual for detailed setting information. (Set IU

AD, REF AD SW to 0)

setting information. (Set IU AD, REF AD SW to 0)

CAUTION

Rotary switch

Example: "0"

Type of switch

Setting

example

IU AD × 10

IU AD × 1

Setting

example

REF AD × 10

REF AD × 1