Drainvac PRO Series Kullanıcı El Kitabı - Sayfa 16

Merkezi Vakum Sistemleri Drainvac PRO Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Drainvac PRO Series 18 sayfaları.

TECHNICAL PROBLEMS

THE UNIT WON'T START UP...

SOLUTION :

1) Check if the LED is lit.

2) Check the circuit breaker in your electrical panel.

3) Check the unit's circuit fuse/breaker.

4) Check the 24-volt circuit, as follows :

Establish an electrical contact between the two 24V circuit terminals of the unit with a

metal object such as a screwdriver or a coin.

• If the unit starts up, either the 24V wire is cut or disconnected from one of the

wall inlets, or the hose is defective.

• If the unit does not start up after all theses steps, the printed circuit is defective.

THE UNIT WON'T SHUT DOWN...

SOLUTION :

Check the 24-volt circuit as follows :

Disconnect one of the two wires on the unit's 24-volt circuit.

• If the unit shuts down, the problem could be that two 24-volt wires are touching

themselves somewhere or that the wall inlet is defective.

• If the unit doesn't shut down, the printed circuit is defective.

Unplug the power cord.

Drainvac International

150 Brunet Street, Mont-St-Hilaire, QC J3H 0M6, Canada