Bosch 300 Series Kullanım ve Bakım Kılavuzu / Kurulum Talimatları - Sayfa 21

Yıkayıcı Bosch 300 Series için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu / Kurulum Talimatları indirin. Bosch 300 Series 40 sayfaları. Built-in wall ovens
Ayrıca Bosch 300 Series için: Kullanım Kılavuzu (40 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Kurulum Kılavuzu (6 sayfalar), Kurulum Kılavuzu (36 sayfalar), Kurulum Kılavuzu (32 sayfalar), Kullanım Talimatları Kılavuzu (50 sayfalar), Hızlı Başlangıç ve Güvenlik Kılavuzu (7 sayfalar), Kurulum Kılavuzu (28 sayfalar), Hızlı Başlangıç Kılavuzu (7 sayfalar), Kullanım ve Bakım Kılavuzu (32 sayfalar), Hızlı Başlangıç ve Güvenlik Kılavuzu (7 sayfalar), Servis Kılavuzu (36 sayfalar), Hızlı Başlangıç ve Güvenlik Kılavuzu (13 sayfalar)

Program selection

For optimum drying results your dryer offers several

different types of programs to choose from.

Select the required drying program from the program

table according to the examples.~ Program selection

table; Page 26

Automatic programs

There are automatic programs for different types of

textiles (regular/cotton, permanent press).

The program sequence of automatic programs is

controlled by sensors. The duration of the program

depends on the measured degree of moisture in the

laundry and on the selected degree of dryness (e.g.

Cotton Dry or Cotton Extra Dry).

Regular/Cotton

▯

Permanent Press

▯

Special programs

The programs Sanitize, Jeans, Anti Shrink, Super Quick

15, Towels, Bulky/Large Items and Heavy Duty

(depending on model) are made for special type fabric

loads.

~ Program selection table; Page 26

Time programs

Time programs run at specific temperatures and are

suitable for delicate items, individual or a few small items

and subsequent drying.

~ Default Program and Option settings; Page 27

Selecting program settings and additional

options

By selecting program settings and additional options,

you can adjust the drying process to better suit the items

you are drying.

The settings can be selected and deselected depending

on the cycle progress.

The indicator lamps of the buttons light up if the setting is

active.

For Time dry, Finish in, Wrinkle Block, Low Heat and

Signal the settings are not retained after the appliance is

switched off.

~ Default Program and Option settings; Page 27

~ Additional Program Option settings; Page 27

For Dry Level the setting is retained after the appliance is

switched off.

~ Dry Level; Page 27