Bosch Aquatak Clic 125 Orijinal Talimat Kılavuzu - Sayfa 6
Yıkayıcı Bosch Aquatak Clic 125 için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Bosch Aquatak Clic 125 16 sayfaları.
Sayfayı Yazdır
6 | English
Safety Notes
en
Before start-up please read these in-
structions!
Before using the machine please read
the operating instructions for your
unit and comply in particular with
these safety instructions. Please
keep the instructions safe for later
use.
The warning and information signs attached to
the unit provide important information for safe
operation.
Apart from the information in the operating in-
structions comply with the general safety reg-
ulations and regulations for the prevention of
accidents.
Never direct the water jet at peo-
ple, animals, the unit or electric
components.
Power supply
The voltage indicated on the rating plate
must correspond to the voltage of the power
source.
We recommend that this equipment is only
connected into a socket which is protected
by a circuit-breaker that would be actuated
by a 30 mA residual current.
If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent
or similarly qualified persons in order to
avoid a hazard.
Never touch the mains plug with wet hands.
Do not pull plug while operating the device.
Do not run over, crush or pull the power sup-
ply cable or extension lead, otherwise it may
be damaged. Protect the cable from heat, oil
and sharp edges.
Do not use the appliance, if the power supply
cable or important parts, e. g. high-pressure
hose, trigger gun or safety devices are dam-
aged.
Warning: Inadequate extension cords can be
dangerous.
F 016 L70 545 | (14.1.11)
If an extension cord is used, the plug and
socket must be of watertight construction.
The extension cord must have a cross section
in accordance with the operating instruc-
tions and be protected against splashed wa-
ter. The connection must not be in water.
When replacing plugs on the power supply
cable or extension lead the spray water
guard and mechanical stability must remain
intact.
Water connection
Comply with the regulations of your water
supply company.
All connecting hoses must have properly
sealed joints.
The appliance should never be used on the
drinking water supply without a back flow
valve. Water which has passed the back flow
valve is regarded as undrinkable.
The high-pressure hose must not be dam-
aged (danger of bursting). A damaged high-
pressure hose must be replaced immediate-
ly. Only use hoses and connections recom-
mended by the manufacturer.
High-pressure hoses, fittings and couplings
are important for the safety of the appliance.
Use only hoses, fittings and couplings recom-
mended by the manufacturer.
Application
Before use, check that the unit and operating
equipment are in perfect condition and are
safe to operate. Do not use the unit if it is not
in perfect condition.
Do not direct the jet against yourself or oth-
ers in order to clean clothes or footwear.
Never draw in solvent-containing liquids, un-
diluted acids, acetone or solvents! This in-
cludes petrol, paint thinners, heating oil. The
sprayed vapour is highly flammable, explo-
sive and toxic.
Bosch Power Tools