Bosch FAP-OC 500Series Kullanım ve Bakım Kılavuzu / Kurulum Talimatları - Sayfa 32

Yıkayıcı Bosch FAP-OC 500Series için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu / Kurulum Talimatları indirin. Bosch FAP-OC 500Series 40 sayfaları. Built-in wall ovens
Ayrıca Bosch FAP-OC 500Series için: Kurulum Talimatları Kılavuzu (21 sayfalar), Kullanım Kılavuzu (40 sayfalar), Kurulum Kılavuzu (6 sayfalar), Ürün Bilgileri (40 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kullanım ve Bakım Kılavuzu (44 sayfalar), Kurulum Kılavuzu (32 sayfalar), Hızlı Referans Kılavuzu (4 sayfalar), Kullanım ve Bakım Kılavuzu (27 sayfalar), Kurulum Kılavuzu (24 sayfalar), Kurulum Kılavuzu (32 sayfalar), Kullanım ve Bakım Kılavuzu (24 sayfalar), Kurulum Kılavuzu (28 sayfalar), Servis Kılavuzu (41 sayfalar), Kullanım ve Bakım Kılavuzu (21 sayfalar), Kurulum Kılavuzu (32 sayfalar), Servis Kılavuzu (36 sayfalar), Kurulum Kılavuzu (32 sayfalar), Hızlı Başlangıç ve Güvenlik Kılavuzu (13 sayfalar)

Sayfayı Yazdır
Bosch FAP-OC 500Series Kullanım ve Bakım Kılavuzu / Kurulum Talimatları

Troubleshooting

Emergency door lock release

In the event of a power interruption the program will
continue running when the power supply has been
restored.
If the washer door must be opened and the normal door
unlock procedures do not work, the emergency door
lock release rod can be actuated to open the door.
WARNING
9
RISK OF SCALDING
To avoid risk of scalding, allow water to cool down
prior to activating the emergency door lock release.
The drum may be full of hot water which could
cause burn injury.
WARNING
9
RISK OF INJURY
You may injure your hands if you reach into the
drum while it is turning.
Do not reach into the drum when it is turning. Wait
until the drum has stopped turning.
CAUTION
9
WATER DAMAGE AND BURN INJURY
Any escaping water may cause water damage and
burns.
Do not open the washing machine door if water can
be seen through the glass.
Turn the washer off by rotating the cycle selector to the
1.
Off position. Any running program will then be
cancelled. Disconnect the mains plug.
Allow the water in the drum to cool off.
2.
Allow the washer drum to come to a stand still (no
3.
longer spinning).
Before opening the washer door, perform the drain
4.
procedure included in the pump maintenance section.
~ Cleaning the drain pump; Page 30
32
Loosen screws and remove the protective foil.
5.
The washing machine door can then be opened.
6.
Pull the emergency release downwards with a tool and
release.
The door can now be opened.
7.

General Troubleshooting

If you encounter a problem, consider the suggestions
and instructions below before you call customer service.
WARNING
9
ELECTRIC SHOCK HAZARD
To avoid risk of electric shock, repairs should be
carried out by an authorized technician.
If repairs are necessary and you cannot eliminate the
fault with the aid of the table below, follow these steps:
Turn the cycle selector to Off.
1.
Disconnect the washer from the power outlet.
2.
Turn off the water taps.
3.
Call Customer Service.
4.
~ Customer service; Page 4
NOTICE: The troubleshooting items listed below can
help you resolve minor issues with your washer quickly
and without the necessity of waiting for a service call.
Service calls for issues that could have been solved by
using this table may not be covered under the
warranty. Please rule out any of these issues before
calling customer service.