Draper Artisan Series Kurulum ve Kullanım Talimatları - Sayfa 2
Projeksiyon Perdesi Draper Artisan Series için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları indirin. Draper Artisan Series 2 sayfaları. Electric projection screen 220 v
Ayrıca Draper Artisan Series için: Kurulum ve Kullanım Talimatları (2 sayfalar)
Sayfayı Yazdır
Artisan Projection Screen by Draper
Tab-Tension Adjustment Procedure
Draper's Tab-Tensioning System is factory-set, and under normal
circumstances will not require fi eld adjustment. If, however, you notice
wrinkles, waves or other indications that the tensioning cables need to
be adjusted, follow the procedure below.
➀ Determine which side requires adjustment.
➁ Secure dowel with one hand.
Caution: Do not touch or bend surface.
➂ Using Phillips-head screwdriver, depress
spring-loaded adjustment screw and slowly
turn clockwise to tighten tension, or
counterclockwise to loosen tension. The
screw adjusts in ¼ turn increments. Adjust
only one increment (¼ turn) at a time.
➃ If problem is not corrected, leave screen in position
for 24 hours to allow surface material to stretch into position.
➄ If problem still is not corrected, repeat steps 2 and 3.
Control
switches
24 VDC
Tensioning
Cable
Dowel
Single Station Control
CE Approved
Terminal strip in
junction box at left
end of screen
Control
switch
Dashed wiring
by electrician
230V,
50 Hz.
Low Voltage (& Wireless) Control Wiring Diagram
Black (Dn)
Red (Up)
White (Com)
Black (Dn)
Red (Up)
White (Com)
Dashed wiring
by electrician
www.draperinc.com
A
B
Adjustment
Screw
Series E
Series V
*Add 29 mm to height if case is to be bevel style.
Wiring Diagrams
Multiple Station Control
PE
230 V, 50 Hz.
CE Approved
Low Voltage
Control Module
Black
Red
Red
White
Brown
White
Black
Yellow
Green
Optional infrared
receiver package
Optional
radio receiver
package
(765) 987-7999
Case Dimensions
Fabric width + C
D
A
B*
127 mm
133 mm
305 mm
152 mm
162 mm
varies
Not CE Approved
Terminal strip in
junction box at left
end of screen
Cap off with wire
nut & tape
Blue
Red
Black
Blue
Red
Black
Blue
Red
Black
Dashed wiring
by electrician
Terminal strip in
junction box at left
end of screen
All-Pole Disconnect
by Others
230 V, 50 Hz.
Page 2 of 2
C
D
152 mm
varies