Draper Envoy Kurulum ve Kullanım Talimatları - Sayfa 3

Projeksiyon Perdesi Draper Envoy için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları indirin. Draper Envoy 3 sayfaları. Electric projection screen
Ayrıca Draper Envoy için: Kurulum ve Kullanım Talimatları (3 sayfalar), Kurulum ve Kullanım Talimatları (3 sayfalar), Kurulum ve Kullanım Talimatları (3 sayfalar), Kurulum ve Kullanım Talimatları (2 sayfalar), Kurulum ve Kullanım Talimatları (2 sayfalar), Kurulum ve Kullanım Talimatları (2 sayfalar)

Sayfayı Yazdır
Draper Envoy Kurulum ve Kullanım Talimatları
Envoy by Draper
Single Station Control
Junction box at
left end of screen
Internal Screen Wiring
White (Common)
Red (Down)
Black (Up)
Green (Ground)
Dashed wiring
by installer
Single gang box by others
Control
Min. 4" x 2 1/8" x 1 7/8" deep
switch
Blue
Red
Black
Location of key
operated on-off
switch if furnished
To 110-120v Line
Please Note: Do not
wire motors in parallel.
Connecting Switch to Motor
with Internal Low Voltage Controller
INTERNAL SCREEN WIRING
Green/Yellow
(Motor Ground)
Red (Up)
Black (Down)
White (Common)
GND
N
To
110-120 VAC
L1
Line
INTERNAL SCREEN WIRING
White (Common)
Red (Up)
Black (Down)
Green/Yellow
(Motor Ground)
To
110-120 VAC
L1
Line
N
GND
wiring Diagrams
Multiple Station Control
Junction box at
left end of screen
Internal Screen Wiring
White (Common)
Red (Down)
Motor
Black (Up)
Green (Ground)
Cap off with wire
nut and tape
Red
Blue
Black
Dashed wiring
by installer
Red
Blue
Black
Red
Blue
Single gang box by others
Black
Min. 4" x 2 1/8" x 1 7/8" deep.
3 shown. More or less equally
feasible.
Location of key
operated on-off
switch if furnished
To 110-120v Line
Data Cable Connection
MOTOR
DATA CABLE
Back of
Back of
Wall Switch
Wall Switch
Built In LVC-IV - Single or Multiple
Dry Contacts
Projection Screen Wiring Diagram
DATA CABLE
Green/Yellow (Ground)
Red-to screen (directional)
Brown-to screen (directional)
White -Common to screen & 110V-220V AC Neutral
Yellow-to 110V-220V AC-Hot
Black-to 110V-220V AC-Hot
Back of
Back of
Wall Switch
Wall Switch
Location of key
operated on-off
switch if furnished.
Dashed wiring by electrician
Low voltage wiring by others
External LVC-IV - Single or Multiple
Projection Screen Wiring Diagram
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110V-220V AC-Hot
Black-to 110V-220V AC-Hot
White -Common to screen & 110V-220V AC Neutral
Green/Yellow (Ground)
Location of key
operated on-off
switch if furnished.
Dashed wiring by electrician
Low voltage wiring by others
www.draperinc.com
110-120V Motor and Quiet Motor
with Built-in Low Voltage Controller
Single Low Voltage Control
Internal Screen Wiring
White (Neutral)
Black
Green (Ground)
Motor
Dashed wiring
by electrician
Wall Switch,
RF or IR
Receiver,
or integrated
Data Cable Connection
control system
MOTOR
To 110-120V Line
DATA CABLE
Back of
Back of
Wall Switch
Wall Switch
Data Cables to
switches or
to additional motors
OR
Dry Contacts
MOTOR
DATA CABLE
Please Note: This Splitter/Jack
is located inside the junction
box of your Access screen.
OR
Back of
Back of
Wall Switch
Wall Switch
MOTOR
Receiver
Button
Please Note: 5V DC must
be connected to set limits
using the wall switch.
Receiver
Button
(765) 987-7999
Multiple Low Voltage Controls
Dashed wiring
by electrician
Data Cable Connection
Data
Cable
MOTOR
DATA CABLE
Wall Switch(es),
Back of
Back of
Wall Switch
Wall Switch
or integrated
control systems
Data Cables to
switches or
to additional motors
To 110-120V Line
Please Note: This Splitter/Jack
is located inside the junction
box of your Access screen.
OR
Dry Contacts
MOTOR
DATA CABLE
Please Note: This Splitter/Jack
is located inside the junction
box of your Access screen.
Back of
Back of
Wall Switch
Wall Switch
3 Button Wall Switch
DOWN - Black
COM - White
Please Note: 5V DC must
UP - Red
be connected to set limits
using the wall switch.
Electrically Straight
Data Cable to more
LVC-IV modules*
RS232/485
Inputs/Outputs
Wall Switch
IR Eye Input
*A maximum of six (6)
Low Voltage
LVC-IV modules can be
Trigger
linked together.
3-28 VDC
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Electrically Straight
Data Cable to more
LVC-IV modules*
RS232/485
Inputs/Outputs
Wall Switch
IR Eye Input
*A maximum of six (6)
Low Voltage
LVC-IV modules can be
Trigger
linked together.
3-28 VDC
Page 3 of 3
Internal Screen Wiring
White (Neutral)
Black
Green (Ground)
Data
Cable(s)
Data Cables to
switches or
to additional motors
RF or IR
Receivers,
Please Note: 5V DC must
be connected to set limits
using the wall switch.