Draper MC1 Talimatlar Kılavuzu - Sayfa 14

Projeksiyon Perdesi Draper MC1 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper MC1 18 sayfaları. Low voltage, remote control, serial and network wiring
Ayrıca Draper MC1 için: Broşür (16 sayfalar), Kablolama Kılavuzu (8 sayfalar)

Sayfayı Yazdır

10. CHARGING PROCESS

10.1 CHARGING PROCESS

The charging process is controlled by a microprocessor.

STAGE 1: BULK CHARGE

Initially, the charger will apply the bulk charge process to the battery. When the digital

sensors detect that the batteries voltage has reached a maximum safe pre-determined level,

the microprocessor will automatically move into the second stage of the charging process.

STAGE 2: ABSORPTION CHARGE

This maintains the charge at a constant, safe voltage. During this stage of the charging

process, the charging voltage remains constant while the charging current is controlled by

the microprocessor to allow for the maximum internal chemical energy transfer to take

place.

STAGE 3: TOP OFF/FLOAT CHARGE:

During this process the charging voltage is automatically maintained to a pre-determined

level while the charging current is monitored and adjusted by the microprocessor for a safe

and effective 100% charge.