Bosch WAE24166GB Kurulum Talimatları Kılavuzu - Sayfa 2

Yıkayıcı Bosch WAE24166GB için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Bosch WAE24166GB 6 sayfaları.
Ayrıca Bosch WAE24166GB için: Kullanım Kılavuzu (8 sayfalar)

Sayfayı Yazdır
Alignment
Loud noise formation, intense vibrations and wandering" may be due to incorrect alignment!
Align washing machine with spirit level.
1. Loosen lock nut in a clockwise direction with a wrench.
2. Change height by rotating the appliance feet.
All four appliance feet must be firmly on the floor.
The washing machine must not wobble!
Check alignment of the washing machine with a spirit level and, if required,
correct.
3. Tighten the lock nut against the housing.
- Grip the foot and do not adjust the height.
The lock nuts on all four appliance feet must be screwed tightly against
the housing!
Electrical connection
F
Connect the washing machine to an alternating current via a correctly installed earthed socket
only.
F
The mains voltage and voltage specifications on the washing machine (appliance rating plate)
must match.
F
Connected load as well as required fuse are indicated on the appliance rating plate.
F
Ensure that:
- the mains plug and socket match,
- the cable cross section is adequate,
- the earthing system has been installed correctly.
F
A damaged power cord may be replaced by an electrician only.
Replacement power cord available from customer service.
F
Do not use multiple plugs/couplings or extension cables.
F
If a residual current operated circuit breaker is used, use only a type which features this
7
symbol:
Only this symbol guarantees compliance with the currently valid regulations.
F
Do not insert/pull out the plug with damp hands.
Do not pull out the mains plug by tugging the power cord.
Manufacturer (see Operating instructions)
1007/9000 150 253
Transportation, e.g. if moving house
Before transporting the washing machine:
1.
1. Turn off the tap.
2. Release the water pressure in the supply hose.
-> operating instructions, page 9; Filter in the water supply.
3. Drain any residual detergent solution.
-> operating instructions, page 9; Detergent solution pump.
4. Isolate the washing machine from the power supply.
5. Remove the hoses.
Preparing and installing the transportation protection devices:
2.
1. Remove the covers.
2. Insert all 4 transportation protection devices and
clamp the mains cable to the
holders. Tighten the bolts.
After transportation, the transportation protection devices must be removed. -> page 3.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the Drain programme.
Technical specifications
Dimensions (width x depth x height)
60 x 59 x 84,7 cm
Weight
69 83 kg depending on model
Mains connection
Nominal voltage 220-240 V, 50 Hz
Nominal current 10A
Nominal power 2000-2300 W
Water pressure
100 1000 kPa (1 10 bar)
Test programmes
According to currently valid IEC 60 456
5
Customer service
F
Before calling customer service, please check whether you can eliminate the fault yourself.
-> operating instructions, What to do if ...
F
If you require advice, even during the warranty period, you will incur costs for the call out
of a technician.
F
You can find your nearest customer service in the enclosed list. Please give customer service
the product number (E Nr.) and the production number (FD) of the appliance.
You can find the rating plate which contains this
information in the frame of the open washing
E Nr.
FD
machine door and in the thick bordered box
+
on the appliance rating plate at the back of the
Product number
Production number
appliance.
F
Please help by quoting the product number and production number to prevent unnecessary
call outs. This will save you additional costs.
Aqua Stop warranty
For appliances with Aqua Stop
only
In addition to warranty claims against the seller based on the contract of sale and in addition
to our appliance warranty we shall pay damages under the following conditions:
1. If water damage was caused by a fault in our Aqua Stop system, we shall compensate private
users for damage.
2. The liability warranty applies to the service life of the appliance.
3. A claim can only be made under the warranty if the appliance and Aqua Stop have been
correctly installed and connected according to our instructions; this also includes a correctly
installed Aqua Stop extension (original accessory).
Our warranty does not extend to defective supply lines or fittings up to the Aqua Stop
connection on the tap.
4. Appliances which feature Aqua Stop can be left unattended during operation and it is not
necessary to turn off the tap afterwards.
The tap should only be turned off if you are away for a prolonged period, e.g. several weeks
holiday.
6
Installation instructions
Washing machine
Contents
Page
J
Safety instructions
. . . . . . . . . . . . . . . . . . . . .
1
J
Scope of delivery
. . . . . . . . . . . . . . . . . . . . . .
1
J
Installation area
. . . . . . . . . . . . . . . . . . . . . . . .
1
J
Hose and cable lengths
. . . . . . . . . . . . . . . . .
2
J
Built under and built in
. . . . . . . . . . . . . . . . . .
2
J
Removing transportation safety devices
. . . .
3
J
Water connection
. . . . . . . . . . . . . . . . . . . . . .
4
J
Aligning the appliance
. . . . . . . . . . . . . . . . . .
5
J
Electrical connection
. . . . . . . . . . . . . . . . . . .
5
J
Transportation, e.g. if moving house
. . . . . .
6
J
Technical specifications
. . . . . . . . . . . . . . . . .
6
J
Customer service
. . . . . . . . . . . . . . . . . . . . . .
7
J
Aqua Stop warranty
. . . . . . . . . . . . . . . . . . . .
7
Read these instructions before switching on the washing machine!
Also follow the separate operating instructions.
Retain all documents for subsequent use or for the next owner.
7
en