Bosch WAE24166GB Kullanım Kılavuzu - Sayfa 4

Yıkayıcı Bosch WAE24166GB için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch WAE24166GB 8 sayfaları.
Ayrıca Bosch WAE24166GB için: Kurulum Talimatları Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Before washing for the first time
Wash once without any laundry –> page 9.
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load –> page 7.
Observe the important information –> page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting and adjusting a programme
Additional functions and spin
speeds –> Individual settings,
ogramme selector
page 5.
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
Measure accordingly:
1
2
Select Start/Pause

Washing

Detergent drawer with
compartments I, II,
Drum
Control panel
Washing machine
door
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without final spin) is active: Turn the
programme selector to
Drain or select the spin speed.
Select Start/Pause.
– Remove any foreign objects -
risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models –> refer to installation
instructions

Switching off

Turn the programme selector to Off.
Programme has ended when...
... Start/Pause flashes and the End indicator light comes
on.
Interrupting the programme
Programmes at high temperatures:
3
– Cool washing: Select
Rinse/Spin ).
– Select Start/Pause.
Programmes at lower temperatures:
–
Rinse/Spin
(deactivate
select
Drain.
– Select Start/Pause.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select Start/Pause. The new programme starts from the
beginning.
Aqua Plus button) or
4