Bosch WAE24363BY/01 Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 17
Yıkayıcı Bosch WAE24363BY/01 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Bosch WAE24363BY/01 36 sayfaları.
Pour the detergent and care products
into the appropriate compartments:
Measuring aid A For liquid detergent
Compartment II
Detergent for the main wash,
water softener, bleach, stain
remover
Compartment i Softener, starch.
Do not exceed the maximum
Compartment I
Detergent for prewash
Pull out the detergent drawer as far
1.
as possible.
Add detergent and/or care products.
2.
Close the detergent drawer.
3.
Measuring aid* for liquid detergent
*Depending on the model
Position the measuring aid for
measuring the correct amount of liquid
detergent:
Pull out the detergent drawer. Press
1.
down the insert and fully remove the
drawer.
Slide the measuring aid forwards,
2.
fold it down and click it into place.
Reinsert the drawer.
3.
Do not use the measuring aid for
Note:
gel detergents and washing powder, or
for programmes with prewash or when
the "Finished in" time is selected.
Operating the appliance
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Select the Start/Reload button. The
indicator lamp lights up and the
programme starts.
During the programme, the display
panel shows the "Finished in" time or,
after starting the wash programme, the
programme duration and the symbols
for the programme progress.
~ Page 9
If you want to lock the
Note:
programme to prevent it from being
inadvertently adjusted, you can select
the childproof lock as follows.
Childproof lock
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock after starting
the programme.
To activate/deactivate the childproof
lock, press and hold "Start/Reload" for
approx. five seconds. The E symbol
appears on the display panel.
E lights up: The childproof lock is
■
active.
E flashes: The childproof lock is
■
active and the programme selector
has been adjusted. To prevent the
programme from stopping, turn the
programme selector back to the
original programme. The symbol
lights up again.
The childproof lock can remain
Note:
activated until you wish to start the next
programme, even after switching off the
machine.
You must then deactivate the childproof
lock before starting the programme and
en
17