Bosch WAG14060IN Çalıştırma ve Kurulum Talimatları - Sayfa 39
Yıkayıcı Bosch WAG14060IN için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Bosch WAG14060IN 43 sayfaları.
Sayfayı Yazdır
Connecting the water
Water inlet hose
39
m
To prevent leaks or water damage, it is essential to
follow the instructions in this chapter!
Warning
Operate the washing machine with cold drinking water
only. Do not connect to the mixer tap of an
unpressurised hot-water apparatus.
If in doubt, have the appliance connected by a
specialist.
The water inlet hose must not be
– kinked or crushed,
– modified or severed (strength is no longer
Plastic threads must only be tightened by hand. Do not
remove the strainers from the water supply hose.
Check the mains water pressure:
– The water pressure should be between 1 and 10
– If the water pressure is higher, install a pressure
Connect the water supply hose
■
■
■
min.10 mm
Risk of electric shock!
guaranteed).
bars (when the tap is turned on, at least 8 litres of
water is discharged per minute).
reducing valve.
to the rear panel of the washing machine and ...
to the tap.
After connecting the water inlet hose:
Turn on the water tap completely, and check
connection points for water-tightness.