Bosch WAJ20068IN Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 13
Yıkayıcı Bosch WAJ20068IN için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Bosch WAJ20068IN 48 sayfaları.
Installation loca-
tion
Wooden joist
floor
Kitchen unit
Against a wall
4.4 Removing the transit
bolts
The appliance is secured for trans-
portation using transit bolts on the
rear of the appliance.
Note: Keep the transit bolt screws
and the sleeves in a safe place for fu-
ture transport.
→ "Inserting the transit bolts",
Page 43
Requirements
Place the appli-
ance on a water-
resistant wooden
board (minimum
thickness of
30 mm) which is
screwed tightly to
the floor.
Only install the
appliance under-
neath a continu-
ous worktop that
is securely con-
nected to adja-
cent cabinets.
Required niche
width: 60 cm.
Do not trap the
power cord or
the hoses
between the wall
and the appli-
ance.
Installation and connection en
Pull the hoses out of the holders.
1.
Unscrew
and remove
2.
the screws for the 4 transit bolts
using a WAF 13 wrench.
Remove the power cable from the
3.
holder.
all of
13