Draper 13274 Talimatlar Kılavuzu - Sayfa 7
Elektrikli Alet Draper 13274 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper 13274 16 sayfaları. 12v analogue tyre inflator
Sayfayı Yazdır
5.
HEALTH AND SAFETY INFORMATION
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become
complacent and ignore tool safety principles. A careless action can cause severe injury
within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if
detachable, from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result
in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacements parts. This will ensure that the safety of the power tool is maintained.
5.2
GENERAL SAFETY INSTRUCTIONS FOR INFLATORS
Warning! Please read the following instructions carefully failure to do so could lead to serious
personal injury.
Important: Draper Tools recommends that this inflator should not be modified or used for any
application other than that for which it was designed. If you are unsure of it's relative applications
do not hesitate to contact us in writing and we will advise you.
Know your inflator. Before operating the inflator, read and fully understand the starting, operating
and stopping sections in this manual. Read all labels affixed to the inflator. Learn it's applications
and limitations.
Servicing and maintenance. Do not service or maintain this inflator until you have read and
understood the maintenance section of this manual.
– 7 –