Draper HBP/10 Talimatlar Kılavuzu - Sayfa 6
Elektrikli Alet Draper HBP/10 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper HBP/10 12 sayfaları. 10 tonne hydraulic bench press
Sayfayı Yazdır
OPERATING INSTRUCTIONS
PUMP UNIT
1. Connect the hydraulic ram and pump unit hose
together, ensure you have securely fastened the
couplings before pumping.
2. Firmly close the release valve ✪✌ by turning it in
a clockwise direction. Fig. 1.
3. Apply pressure to the pump ✫✌ by pumping the
handle ✬✌ up and down. Fig. 1.
4. To release the pressure turn the valve
anti-clockwise.
NOTE: The pump can be used in any position, i.e.
horizontal to vertical. Always keep the hose
end of the pump unit facing downwards when
positioned vertically. Fig. 2.
POSITIONING
To move the ram ✭✌ into the required
Ram:
position loosen the bolts ✮✌ and slide
into place. Tighten the bolts before
operating the ram. Fig. 3.
Work table: The height of the work table ✯✌ is
adjusted by removing the support pins
✰✌ and relocating in a higher or lower
hole in the main frame ✱✌.
NOTE: The table should always remain
level.
Fig. 1
✫✌
Fig. 2
Fig. 3
Fig. 4
- 6 -
✬✌
✮✌
✯✌
✰✌
✰✌
✱✌
✪✌
✭✌