Bosch WAK24268IN Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 34
Yıkayıcı Bosch WAK24268IN için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Bosch WAK24268IN 40 sayfaları.
Ayrıca Bosch WAK24268IN için: Kullanım Kılavuzu ve Kurulum Talimatları (40 sayfalar)
Positioning and connecting
en
Notes
In addition to the safety information
■
listed here, the local water and
electricity supplier may have special
requirements.
If in doubt, have the appliance
■
connected by a specialist.
Installation surface
The washing machine must be
Note:
stable aligned so that it does not move
around.
The installation surface must be firm
■
and level.
Soft floors/floor coverings are not
■
suitable.
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander"
and tip/topple from the base when
spinning.
The feet of the appliance must be
secured with holding brackets.
Order no. WMZ 20490,
WZ 20490 WZ 20510, WZ 20520
On wooden joist floors, install the
Note:
washing machine:
In a corner, if possible,
■
On a water-resistant wooden board
■
(min. 30 mm thick) which is screwed
tightly to the floor.
Installing the appliance in a
kitchenette
:
Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.
34
Notes
Recess width of 60 cm required.
■
Only install the washing machine
■
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
Removing the transport locks
Caution!
Damage to the appliance
The machine is secured for
■
transportation using transport locks.
If the transport locks are not
removed, the drum, for example,
may become damaged when the
machine is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
To prevent transport damage from
■
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Keep the screws and sleeves in
Note:
a safe place.
Take the hoses out of the holders.
1.