Draper 83577 Talimatlar Kılavuzu - Sayfa 13

Matkap Draper 83577 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper 83577 20 sayfaları. 18v cordless rotary drill

BASIC CORDLESS ROTARY DRILL OPERATIONS

8.8 HOLDING THE DRILL - FIGS. 7 - 8

The drill casing is designed to be held comfortably in

two ways,

1. By the handle.

2. Or by the in-line support grip.

To prevent splitting around the drill holes on the

reverse side, place a piece of scrap timber under the

material to be drilled.

Metals such as sheet steel, aluminium and brass may be

drilled. Mark the point to be drilled with a centre punch

to help the drill bit tip to locate. A drop of oil on the

area will aid cutting and help prolong the life of the bit.

To prevent slip or damage to the screwhead, match the

screwdriver bit to the screwhead size. To remove screws,

move the direction switch to the reversing position and

apply pressure to the screwhead and depress the trigger

slowly).

Screwdriver bits are a consumable items.

Before drilling check that there are no hidden hazards

such as electrical cables, water or gas pipes running

below the surface use a metal/voltage detector.

Do not expose either the drill or charger to rain or

water.

Do not overcharge the battery (more than six hours) as

this could damage the battery cells.

FIG.7

FIG.8