Draper MBS46A Talimatlar Kılavuzu - Sayfa 9
Testere Draper MBS46A için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper MBS46A 16 sayfaları. Horizontal and vertical metal cutting bandsaw
Sayfayı Yazdır
Material
Tool steel, stainless steel,
alloy steel and bearing
bronze
Mild steel, hard brass
bronzes
Soft brass, non-ferrous
metals and other
soft materials
Blade Replacement and Tension
Disconnect from power supply. With the head in the vertical position remove the three
screws holding on the blade cover. Turn the blade tension knob ✶✌ in an anti-
clockwise direction to loosen the blade. Remove the two smaller blade guards ✷✌ and
then remove the blade from the machine. To fit the new blade feed it between the
upper and lower blade guide bearings. Refit the blade guards then fit over the two
wheels. Now retighten the blade tension until no blade slide occurs. Refit blade cover.
OPERATION AND USE
MATERIAL CUTTING CHART
Speed
0.33m/s
0.48m/s
0.84m/S
FIG.8.
Motor pulley
50Hz
Medium
✶✌
✷✌
- 8 -
Belt Groove Used
Saw pulley
Small
Large
Large
Medium
Small