Draper 02520 Manuel - Sayfa 7

Öğütücü Draper 02520 için çevrimiçi göz atın veya pdf Manuel indirin. Draper 02520 20 sayfaları. 230v router
Ayrıca Draper 02520 için: Manuel (20 sayfalar)

Sayfayı Yazdır

HEALTH AND SAFETY INFORMATION

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing

away from moving parts. Loose clothes, jewellery or long hair can be caught in moving

parts.

g) If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce

dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you to become

complacent and ignore tool safety principles. A careless action can cause severe injury

within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or remove the battery pack, if

detachable, from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the power tool's

operation. If damaged, have the power tool repaired before use. Many accidents are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could result

in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for safe handling and control of the tool in

unexpected situations.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical

replacements parts. This will ensure that the safety of the power tool is maintained.

5.2

SPECIFIC SAFETY INSTRUCTIONS FOR ROUTER USE.

a) Hold power tool by insulated gripping surfaces, when performing an operation where the

cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting

a "live" wire may make exposed metal parts of the power tool "live" and could give the

operator an electric shock.

b) Always wear a dust mask and ear protection when using this power tool.

c) Use only bits, which are designed for this router.

d) Use only sharp bits that are not chipped or cracked. Blunt bits will cause stalling.

e) Secure small pieces of wood firmly before working. Never hold them in your hand.

f) Danger. Keep hands away from the cutting area.

– 7 –