Draper 29620 Talimatlar Kılavuzu - Sayfa 10

Öğütücü Draper 29620 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper 29620 16 sayfaları. Bench grinders
Ayrıca Draper 29620 için: Talimatlar Kılavuzu (16 sayfalar)

Sayfayı Yazdır

To fit the eye shields to the bench grinder

attach clamp ❂✌ to the wheel guard using lock

knob ❃✌ large star washer ✪✌ and large

washer ✫✌ as shown in Fig.11. Insert mounting

rod ✿✌ into the clamp ❂✌, position as

required and tighten lock knob ❃✌. The eye

shield is fully adjustable. It can be adjusted by

either loosening the lock knob ❃✌ and moving

the rod ✿✌ or by moving the eye shields.

ATTACHING THE COOLING TROUGH

(GHD200 ONLY)

Attach the cooling trough to the bench grinder

by inserting the lug on the bottom of the tray

into the hole in the base at the front of the

bench grinder. See Fig.12.

Fastening the Bench Grinder to a Bench

Securely bolt the bench grinder to a

workbench through the two holes (GHD200 -

four holes), in the base of the machine. Ensure

there is enough clear area around the grinder

to accommodate larger items which may be

ground, ie. garden tools, etc.

ASSEMBLY (GHD150 & GHD200)

✫✌

✪✌

❃✌

Fig.12.

- 9 -

✿✌

❂✌

Fig.11.