Draper 57839 Talimatlar Kılavuzu - Sayfa 7

Öğütücü Draper 57839 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper 57839 12 sayfaları.

IMPORTANT – Check before plugging in that the mains

voltage agrees with the voltage specified on the rating plate

of the machine.

FITTING THE GUARD

Before fitting the disc to the machine, the protective guard

must be fitted and adapted to working requirements.

Fitting the guard:

– Fit the collar of guard ✭✌ on flange ✮✌

– Tighten screw ✯✌ make sure that the guard is securely

fixed to the flange (Fig.2).

CAUTION

Never fit the guard with the splinter deflector facing

outwards.

FITTING THE ABRASIVE DISC

Fit flange ✲✌ and ensure it engages with the flat on the

spindle ✴✌.

– Place the disc on the shaft.

– Lock the spindle with button ✱✌ on the head of the

machine.

– With the spindle locked, screw the flange nut ✰✌ on to

the spindle (NOTE: Boss towards grinding disc, and away

from cutting disc) and then tighten with pin spanner

which is supplied with the machine (Figs. 2 & 3).

REMOVING THE DISC

In order to replace the disc, carry out the aforementioned

procedure in reverse.

OPERATION & USE

Fig.2

✮✌

✯✌

✭✌

✳✌

Fig.3

- 6 -

✴✌

✲✌

✰✌

✱✌