Draper FlexShade NEXD Talimatlar Kurulum ve Çalıştırma - Sayfa 9

İç Mekan Mobilyaları Draper FlexShade NEXD için çevrimiçi göz atın veya pdf Talimatlar Kurulum ve Çalıştırma indirin. Draper FlexShade NEXD 10 sayfaları. Clutch-operated small and large hardware
Ayrıca Draper FlexShade NEXD için: Kurulum ve Çalıştırma Talimatları (6 sayfalar), Talimatlar Kurulum ve Çalıştırma (8 sayfalar), Talimatlar Kılavuzu (8 sayfalar), Talimatlar Kurulum ve Çalıştırma (8 sayfalar), Talimatlar Kılavuzu (12 sayfalar)

Sayfayı Yazdır
Draper FlexShade NEXD Talimatlar Kurulum ve Çalıştırma
Bottom-Up FlexShade
Small and Large Hardware

Section 12 - Headbox Installation

Please Note: Installer must provide adequate clearance for removal of Roller Assembly during installation and maintenance.
Please Note: Headbox must be mounted directly to ceiling, or to a continuous blocking that is secured to building structure.
Please Note: For pocket style headbox, small size will require securing closure panel to endcap with provided screw.
1.
Lift headbox into mounting
position. Slide endcaps into the
pocket extrusion of headbox.
2.
Mark location of optional pre-drilled
pocket mounting holes and endcap
mounting holes on top side of headbox
on mounting surface.
6.
Mount
Please Note:
The Small pocket headbox is available for upper hardware, but not for bottom hardware.
pocket
The Closure Panel is available for Small or Large upper headbox, and Large lower headbox ONLY.
closure.
Closure panel is NOT available for Small lower headbox.
Small Pocket Headbox
Figure 12-C
STEP 1
Large Pocket Headbox
Figure 12-D
STEP 1
NEXD,
®
Figure 12-A
3.
Drill small starter
hole
(if necessary)
mounting surface.
Figure 12-B
STEP 2
STEP 2
page 9 of 10
4.
Mount pocket
headbox using
in
appropriate
fasteners for
surface.
5.
Mount endcaps using
appropriate fasteners
for surface
(Section 1)
STEP 3
Secure to Endcap
with Screw
STEP 3
.