Draper StormForce PT180SF Talimatlar İçin - Sayfa 11

Sander Draper StormForce PT180SF için çevrimiçi göz atın veya pdf Talimatlar İçin indirin. Draper StormForce PT180SF 16 sayfaları.

SETTING UP THE SANDER

8.3

ABRASIVE PAPER

Only use good quality abrasive paper as this will

improve the sanding efficiency and reduce working

time. Use coarse grade (40, 60, or 80) sanding sheets

when large quantities of material need to be

removed. For finishing operations use 120 grade

sanding sheets.

Replace abrasive sheets when clogged with material

or when surface/edge has rips, cracks or worn areas.

NOTE: Abrasive sheets and the sander base pad are

consumable items.

8.4

The orbital sander is equipped with a bag for dust

collection for small jobs that do not require the use

of a suction unit. Always remember to empty the

dust bag regularly, as a full dust bag will reduce

efficiency.

8.5

- FIG. 3

Inhalation of dust particles can be detrimental to

health. For larger jobs it is recommended that the

dust extraction facility is used in conjunction with a

suitable vacuum cleaner

The dust extraction port is fitted by inserting the

bayonet end into the rear of the sander and then

twisting it through approximately 90º. This will then

lock the port in place ready to receive a connection to

a suitable dust extractor/vacuum cleaner.

NOTE: Due to the outlet diameter, a size adaptation

may be necessary.

All wood dust (including dust from composites like

chipboards and fibre boards etc) is hazardous to

health; it can affect the nose, the respiratory system

and the skin. For example MDF (medium density

fibreboard) which contains formaldehyde is a known

carcinogen. In addition to the above measures a

correctly fitted dust mask, suitable for the activity

and in accordance to the relevant standard, must be

worn.

For work activities involving exposure to fine wood

dust, a mask rated to at least FFP2 should be used.

FIG.3