Draper StormForce PT241SF Talimatlar İçin - Sayfa 11
Sander Draper StormForce PT241SF için çevrimiçi göz atın veya pdf Talimatlar İçin indirin. Draper StormForce PT241SF 16 sayfaları. 110w 230v 240mm polisher
Ayrıca Draper StormForce PT241SF için: Talimatlar Kılavuzu (16 sayfalar)
Sayfayı Yazdır
9.
BASIC HAMMER DRILL OPERATIONS
WARNING: Prior to beginning any drilling, carefully
check the surface for the presence of electric cable, gas
or water pipes and other dangerous or damaging
contents. If unsure do not proceed.
NOTE: Remove the plug from the socket before carrying
out adjustment, servicing or maintenance.
9.1 FUNCTION SELECTOR - FIGS. 2 - 3
FIG.2: Rotary/Hammer selector
Rotary Drill
Hammer Drill
FIG.3: Rotation/Stop selector
Rotation
Chisel
(Rotation stop)
9.2 ROTARY DRILLING
With the drill at standstill, position the rotary/ hammer
selection lever
to the right ( ). Rotate the
rotation/stop selector
This set-up is for standard drilling ie. into wood.
9.3 PNEUMATIC HAMMER DRILLING
With the drill at standstill, position the rotary/ hammer
selection lever
to the left ( ). Rotate the
rotation/stop selector
This set-up is for masonry drilling ie. into brick, concrete,
block work, etc.
9.4 PNEUMATIC CHISELLING
With the drill at standstill, position the rotary/ hammer
selection lever
to the left ( ). Rotate the
rotation/stop selector
This set-up is for chiselling with the chuck rotation stop
engaged ie. chiselling/chasing out brickwork,
plasterboard, etc.
9.5 TRIGGER SWITCH - FIG. 4
Select the required function. Pull trigger
the machine.
to the left ( ).
to the left ( ).
to the right ( ).
FIG.2
to activate
FIG.4
FIG.3
11