Drawell GI100TW Kullanıcı Kılavuzu - Sayfa 4

Laboratuvar Ekipmanları Drawell GI100TW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Drawell GI100TW 6 sayfaları.

Range of pressure

gauge

Designed

pressure

Controller

Safety device

Accessories

Optional parts

ⅢOperational Steps:

1. Connect the power ( 36L and 54L got the plug, 80L and 100L, must be

connected to the air switch, connect the power cord to air switch with

power pack, of which, the red line connecting with live wire, green

line with zero and yellow/green line with earth wire. Below is the

power supply requirements: 36L/54L: 16A, 80L/100L: 32A.

(220V,50/60Hz)

2. Turn on the swift on the right side of the operational board. The

machine will do the self checking, all the lights will blink for 3 times,

the "ST-BY" light will be on, it means the machine is on "Stand-by"

status.

3. Open the cover, take off the waste water tank and exhaust hose.

4. Put some water in the waste water tank, the water should be below

the "High" line.

steam trapping bottle

0-0.6Mpa

0.3Mpa

"SMART III" microcomputer control system

Self-induction pressure interlocking device, over temperature

protection system, dry scorch protection system, overpressure

protection, safety valve, over current and short circuit protection,

cover inspection system, leakage protection device, anti-scald

safety protection and automatic troubleshooting system

Stainless steel basket

Printer and printing set

Connect the exhaust to the hose in the back to the