Drawell DW-KDN-20D Kullanım Talimatları Kılavuzu - Sayfa 7

Fırın Drawell DW-KDN-20D için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Drawell DW-KDN-20D 11 sayfaları. Digestion furnace

Digestion furnace temperature control

D-type digital digestion oven, using a new generation of digital temperature controller to

control the digester heating, can display the target temperature and the actual temperature value,

the user can change the heating temperature according to actual needs.

a. "PV" display window: shows the current temperature value;

b. "SV" display window: display the new parameter value after setting the

value and the self-defined value;

c. "

" mode menu key: set the temperature value / enter the instrument to view, set parameters,

confirm and modify the parameters have been set.

d. "AT" self-adjusting indicator: The instrument activates self-adjusting function keys;

e. "OUT" master output indication: light during heating;

f. "ALM" signal indicator;

g. "

" "

" Addition and Subtraction Key: When setting parameters, it is used to increase or

decrease the value.

Press "

" key, when "SP" appears in "PV" window, press "

to increase or decrease according to the required temperature value. When the value of "

display window reaches the required temperature value, ie After the setting is completed, press

" to confirm.

a. Put the digestive tube containing samples in vitro digestion rack, will waste gas in the in

vitro digestion absorption equipment rack (hands holding a waste gas absorption bottle, to absorb

the gas bottle seal on the digestive tube, cover can.)

b. According to the above diagram, connect the tap water and the pumping pump, and pay

attention to the proper water flow (3/4l /min). First pick good extraction tee (the suction filter

pump), adjust flow after connected to the gas absorption tube (besides using standard, our

company also with another high matches: vacuum pumps, filters, and exhaust gas absorption

equipment connection. This method can neutralize the harmful gases such as SO2, which is easier

to operate.

c. Connect the power cord in the fitting, open the main switch of the ship type power supply, the

temperature instrument is bright, and the first infrared quartz tube is energized to start the work;

Press the power switch 1, and the second infrared quartz tube begins to heat; Press the power

temperature control

" and "