Drawmer 1969 Operatör El Kitabı - Sayfa 8

Kayıt Ekipmanları Drawmer 1969 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Drawmer 1969 13 sayfaları. Dual vacuum tube compressor
Ayrıca Drawmer 1969 için: Operatör El Kitabı (13 sayfalar)

Sayfayı Yazdır

Attack:

Attack Times:

Release:

Release Times

Output: (Gain)

VU Meter:

VU / GR:

Norm/Bypass

S/C Listen:

Six switchable Attack settings are provided giving various

settings. The actual attack time is further modified by the

release setting chosen.

2 ms

8 msec

15 msec

25 msec

30 msec

50 msec

There are three fixed Release times and a further three

which are programme dependent. Switch settings 1

through to 3 provide progressively increasing release times,

while positions 4, 5 and 6 cause the release times to vary in

a manner which automatically adapts to the dynamics of the

incoming signal, as detailed below:-

100 ms

500 msec

1 sec

Semi-Auto 200 ms to 2 sec Signal dependent

Semi-Auto 500 ms to 5 sec signal dependent

Automatic 1 sec to 10 sec signal dependent

The Output level may be amplified, or attenuated by up to

20dB to compensate for level changes caused by

compression.

A moving coil VU meter monitors either the level of the

output signal (over the range -10dB to +10dB with reference

to the +4dBu operating level) or the amount of gain

reduction taking place. Because the meter has VU

characteristics, it closely reflects what is actually being

heard, though will not respond quickly enough to register

short signal peaks.

Switches the meters to show either the output level (VU) or

the amount of gain reduction (GR).

Normal mode, the signal is passed through the compressor.

Bypass takes the compressor and the vacuum tubes out of

circuit path; the output signal is taken from the signal insert

return point.

S/C Listen routes the side-chain signal directly to the

output allowing the effects of any additional side-chain

processing, such as equalisation, to be monitored.

1969 OPERATORS' MANUAL

(Fixed)