Bosch 8 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 30

Sayfayı Yazdır

Bosch 8 Series Kullanım Kılavuzu ve Kurulum Talimatları

en Installation instructions

¡ Contact protection must be guaranteed by the in-

stallation.

Electrically connect the appliance with the

protective contact plug

Note: The appliance must only be connected to a pro-

tective contact socket that has been correctly installed.

Insert the plug into the protective contact socket.

▶

When the appliance is installed, the mains plug of

the power cord must be freely accessible. If free ac-

cess to the mains plug is impossible, an all-pole

isolating switch must be integrated into the perman-

ent electrical installation in accordance with the in-

stallation regulations.

Electrically connecting an appliance without a

protective contact plug

Note: Only a licensed professional may connect the ap-

pliance. Damage caused by incorrect connection is not

covered under the warranty.

An all-pole isolating switch must be integrated into the

permanent electrical installation according to the install-

ation regulations.

Identify the phase and neutral conductors in the

socket.

The appliance may be damaged if it is not connec-

ted correctly.

Connect the hob in accordance with the connection

diagram.

See the rating plate for the voltage.

Connect the wires of the mains power cable accord-

ing to the colour coding:

Green/yellow = Protective conductor

‒

Blue = Neutral conductor

‒

Brown = Phase (external conductor)

‒

22.9 Installing the appliance

Slide the appliance in fully and centre it.

Screw the appliance into place.

For handleless kitchens with vertical bar handle

strips:

‒

⁠

Note: The gap between the worktop and the appliance

must not be closed by additional battens.

Thermal insulation strips must not be fitted to the side

panels of the surround unit.

22.10 Removing the appliance

Disconnect the appliance from the power supply.

Undo the fastening screws.

Lift the appliance slightly and pull it out completely.

Attach a suitable filling piece

any sharp edges and to guarantee a safe install-

ation.

Pre-drill aluminium profiles to establish a screw

connection

⁠ .

Secure the appliance using a suitable screw

⁠ in order to cover

⁠ .