Bosch 8 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 12

Sayfayı Yazdır

Bosch 8 Series Kullanım Kılavuzu ve Kurulum Talimatları

en Before using for the first time

Wire rack

Insert the wire rack with the open

side facing the appliance door and

the curved lip

Baking tray

Slide the tray in with the sloping

E.g. univer-

edge

sal pan or

baking tray

7 Before using for the first time

Configure the settings for initial start-up. Clean the ap-

pliance and accessories.

7.1 Performing initial start-up

After connecting the appliance to the power supply,

you must configure the settings for its initial start-up. It

may take a few minutes for the settings to appear on

the display.

Press

to switch the appliance on.

a The first setting appears.

To change the setting as required, press a value in

the list or change the value using the setting ring.

Possible settings:

– Language

– Home Connect → "Home Connect ", Page 20

– Time

→ "Setting the time", Page 20

Press

and switch to the next setting.

Work through the settings and make changes as re-

quired.

a After the last setting, a message appears on the dis-

play confirming that the initial start-up is complete.

To check the appliance before heating for the first

time, open and close the appliance door once.

facing downwards.

towards the appliance door.

Push the accessory all the way in, making sure that

it does not touch the appliance door.

Note: Take any accessories that you will not be using

out of the cooking compartment while the appliance is

in operation.

6.4 Other accessories

You can purchase other accessories from our after-

sales service, specialist retailers or online.

You will find a comprehensive range of products for

your appliance in our brochures and online:

www.bosch-home.com

Accessories vary from one appliance to another. When

purchasing accessories, always quote the exact

product number (E no.) of your appliance.

You can find out which accessories are available for

your appliance in our online shop or from our after-

sales service.

7.2 Cleaning the appliance before using it

for the first time

Before using the appliance to cook food for the first

time, you must clean the cooking compartment and ac-

cessories.

Remove the product information and the accessor-

ies from the cooking compartment. Remove any

leftover packaging, such as polystyrene pellets, and

any adhesive tape that is in or on the appliance.

Wipe the smooth surfaces in the cooking compart-

ment with a soft, damp cloth.

Press

to switch the appliance on.

Apply the following settings:

Type of heating

Temperature

Cooking time

→ "Basic operation", Page 13

Start the operation.

Ventilate the kitchen while the appliance is heat-

‒

ing.

a When the time has elapsed, a signal sounds. A

message appears on the display confirming that the

operation has finished.

Press

to switch the appliance off.

Once the appliance has cooled down, clean the

smooth surfaces in the cooking compartment with a

detergent solution and a dish cloth.

Clean the accessories thoroughly using a detergent

solution and a dish cloth or soft brush.

2D hot air

Maximum

1 hour