Bosch 8 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 42

en Installation instructions

When the appliance is installed, the mains plug of

the power cord must be freely accessible. If free ac-

cess is not possible, an isolating switch must be in-

tegrated into the permanent electrical installation ac-

cording to the installation regulations.

Electrically connecting an appliance without a

protective contact plug

Note: Only licensed specialists may connect the appli-

ance. Damage caused by incorrect connection is not

covered under the warranty.

An isolating switch must be integrated into the perman-

ent electrical installation according to the installation

regulations.

Identify the phase and neutral conductors in the

socket.

The appliance may be damaged if it is not connec-

ted correctly.

Connect the hob in accordance with the connection

diagram.

See the rating plate for the voltage.

Connect the wires of the mains power cable accord-

ing to the colour coding:

Green/yellow = Protective conductor

‒

Blue = Neutral conductor

‒

Brown = Phase (external conductor)

‒

27.8 Installing the appliance

Slide the appliance in fully and centre it.

Screw the appliance into place.

Note: The gap between the worktop and the appliance

must not be closed by additional battens.

Thermal insulation strips must not be fitted to the side

panels of the surround unit.

27.9 For handleless kitchens with vertical

bar handle strips:

Attach a suitable filling piece in order to cover any

sharp edges and to guarantee a safe installation.

Pre-drill aluminium profiles to establish a screw con-

nection.

Secure the appliance using a suitable screw.

27.10 Removing the appliance

Disconnect the appliance from the power supply.

Undo the fastening screws.

Lift the appliance slightly and pull it out completely.