Bosch CDG634B 3W Series Kullanım Kılavuzu - Sayfa 14

Fırın Bosch CDG634B 3W Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bosch CDG634B 3W Series 36 sayfaları.

Time-setting options

en

After each use

:
Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Moisture and dirt remain in the cooking compartment
after each operation. Therefore dry and clean the
appliance after each use. Also empty the water tank
after each use.
Drying the cooking compartment
:
Warning – Risk of scalding!
The water in the evaporator dish may still be hot. Allow
it to cool before wiping.
Leave the appliance door ajar until the appliance has
1.
cooled down.
Remove any dirt from the cooking compartment
2.
immediately.
Wipe out the cooled cooking compartment and
3.
evaporator dish with the cleaning sponge and dry
with a soft cloth.
Wipe the front of the units dry if condensation has
4.
formed.
Emptying the water tank
The water tank must be emptied and dried after each
steam operation.
Caution!
Do not dry the water tank in the hot cooking
compartment. This will damage the water tank.
Do not clean the water tank in the dishwasher.This
will damage the water tank.
Open the appliance door.
1.
Remove the water tank and empty the residual
2.
water.
Thoroughly dry the seal in the tank cover and the
3.
water tank recess in the appliance.
Insert the water tank into the water tank recess.
4.
Close the appliance door.
5.
14
OTime-setting options
Y our appliance has different time-setting options.
T i m e - s e t t i n g o p t i o n s
Time-setting option Use
Cooking time
After the set cooking time has elapsed, the
q
appliance ends the operation automatically.
End
Enter a cooking time and the required end
r
time. The appliance starts automatically so
that the operation ends at the required time.
Timer
The timer functions like an egg timer. It runs
t
independently from the operation and the
other time-setting options. After the set time
has elapsed, the appliance does not switch on
or off automatically.
You can call up the cooking time and the end time after
setting a operation using the s field. The timer has a
separate t field and can be adjusted at any time.
A signal sounds after a cooking time or timed period
has elapsed. You can cancel the signal early by
touching the s field.
You can change how long the signal sounds for
Note:
in the basic settings. ~ "Basic settings" on page 19

Setting the cooking time

You can set the cooking time for your dish on the
appliance. This means that the cooking time is not
unintentionally exceeded and you do not need to
interrupt other work in order to end the operation.
You can set a cooking time for each heating type.
Applying settings
The cooking time can be set in one-minute increments
up to one hour, and then in five-minute increments.
Example in the picture: Cooking time of 45 minutes.
Set the type of heating and temperature.
1.
Touch the s field before starting.
2.
The cooking time is highlighted in white in the
display.
Turn the rotary selector to set the cooking time.
3.
The value is applied after a few seconds, or touch
the s field twice. The cooking time is shown in the
display under the type of heating and temperature or
level.
Types of heating