Bosch CMG656R.1I Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 12
Fırın Bosch CMG656R.1I için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Bosch CMG656R.1I 48 sayfaları.
Sayfayı Yazdır
en Accessories
Accessories
Wire rack
Universal pan
Baking tray
Meat thermometer
6.1 Information on accessories
Some accessories are only suitable for certain types of
heating.
Microwave accessories
The wire rack that is supplied is only suitable for opera-
tion solely using the microwave.
Baking trays, e.g. the universal pan or the baking tray,
may create sparks and are not suitable.
Observe the information about the microwave.
→ "Cookware and accessories with microwave",
Page 16
6.2 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
6.3 Sliding accessories into the cooking
compartment
Always slide the accessory into the cooking compart-
ment the right way round. This is the only way to en-
sure that accessories can be pulled out approximately
halfway without tipping.
Turn the accessories so that the notch
1.
rear and is facing downwards.
Insert the accessory between the two guide rods for
2.
a shelf position.
12
Wire rack
Baking tray
E.g. univer-
sal pan or
baking tray
To place the accessory at shelf positions with pull-
3.
out rails, pull out the pull-out rails.
Wire rack
or baking
tray
is at the
Use
¡ Cake tins
¡ Ovenproof dishes
¡ Cookware
¡ Meat, e.g. roasting joints or steak
¡ Frozen meals
¡ Moist cakes
¡ Baked items
¡ Bread
¡ Large roasts
¡ Frozen meals
¡ Catch dripping liquids, e.g. fat when
grilling food on the wire rack.
¡ Tray bakes
¡ Small baked items
High-precision roasting or cooking.
→ "Meat probe", Page 18
Push the wire rack in with the
curvature pointing downwards. The
word "microwave" must be at the
front at the appliance door.
Slide the tray in with the sloping
edge towards the appliance door.
Position the accessory so that its
edge is behind the lug on the pull-
out rail.